31 & 31X Model Trimmers

(Total votes: 0)

$0.00

31 & 31X Model Trimmers and Options

31 Model Trimmer
“The Professional” A 10” [25cm] diameter model trimmer powered by a full 1/3 HP ball bearing, capacitor start motor. Features include a swing-open front housing for ease of cleaning and wheel changing, internal gutter to facilitate water runoff, full wheel radius water spray for efficient wheel cleaning, drain trough which completely surrounds the model tray to prevent water leakage, large 1” [2.5cm] diameter water exhaust, motor cover with removable top plastic utility tray. Unit shipped complete, ready to use with minor set-up. Finished with a durable, baked coating.
31 MODEL TRIMMER OPTIONS:
31-SV with Solenoid Valve
31-3214 with Ortho-angulator
31-WKD with diamond wheel

31X Model Trimmer
A “Professional” 10” [25cm] diameter model trimmer powered by a 1/4 HP ball bearing, capacitor start motor for those desiring lower pricing. Features include a swing-open front housing for ease of cleaning and wheel changing, internal gutter to facilitate water runoff, full wheel radius water spray for efficient wheel cleaning, drain trough which completely surrounds the model tray to prevent water leakage, large 1” [2.5cm] diameter water exhaust, motor cover with removable top plastic utility tray. Lower torque feature for those who perform fewer model trimming operations. Shipped complete, ready for use with minor set-up. Finished with a durable, baked coating.
31X MODEL TRIMMER OPTIONS:
31X-SV with Solenoid Valve
31X-3214 with Ortho-Angulator
31X-WKD with Diamond Wheel

Share

  • 31 MODEL TRIMMER
    MODEL TRIMMER OPTIONS:
    31-SV with Solenoid Valve
    31-3214 with Ortho-angulator
    31-WKD with diamond wheel
    115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
    Shipping Wgt.: 48 lbs [21.8 Kg] Unit Dimensions: 16” D x 13” W x 12 3/4” H [41cm x 33cm x 32cm]

    31X Model Trimmer
    Model Trimmer Options:
    31X-SV with Solenoid Valve
    31X-3214 with Ortho-Angulator
    31X-WKD with Diamond Wheel
    115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
    Shipping Wgt.: 48 lbs [21.8 Kg] Unit Dimensions: 16” D x 13” W x 12 3/4” H [41cm x 33cm x 32cm]

  • Weight 48 lbs [21.8 Kg]
    Dimensions 16” D x 13” W x 12 3/4” H [41cm x 33cm x 32cm]
    Composition:

    Cast Iron

    Options:

    1/3 HP (Model 31)
    1/4 HP (Model 31X)

    Instruction Manual

    26A Red Wing Lathe Manual

CALL US +1 800 274 2635 We will take it from there.
OR
SEND EMAIL TO US Just send your email to this address:info@handlermfg.com