Jewelry Chucks, Autochucks & Spindles

(Total votes: 0)

$0.00

Jewelry & Industrial Chucks and Spindles

#20: Tapered Steel Spindles for 1/2” or 5/8” straight shaft. Right or Left

#30J: Threaded Tapaered Steel Spindle for HANDLER #30 or #30A polishing motor. Right Only.

#16E-4: Tapered Steel Spindle for 5/8” Straight shaft on HANDLER’S #16E or #16T Lappers. Left Only.

#20CAF: Combination Steel Spindle, Arbor & Flange for 1/2” or 5/8” straight shaft motor. Right or Left

#30CAF: Threaded combination Steel Spindle, Arbor & Flange for use with HANDLER’s #30 or #30A polishing motor. Right Only.

#20AF: Arbor & Flange, Steel for 1/2” or 5/8” straight shaft. Right or Left.

#30AF: Threaded Arbor & Flange, Steel  for use with HANDLER’s #30 or #30A polishing motor. Right Only.

#16E-5: Lapper Arbor & Flange, Steel for 5/8” straight shaft on HANDLER’s #16E or #16T Lappers. Left Only

#20AC: Arbor & Flange, Steel for 1/2” or 5/8” straight shaft on HANDLER’s #16E or #16T Lappers. Right Only.

#30AC: Threaded Arbor & Chuck, Steel for use with HANDLER’s #30 or #30A polishing motor. “Jacobs-Style”, 0” to 1/4”. Right Only.

#8 Chuck: “Jacobs-Style”, from 0” to 1/4”. For use on 1/2” straight shaft. Right Only.

Share

  • Jewelry & Industrial Chucks and Spindles

    #20: Tapered Steel Spindles for 1/2” or 5/8” straight shaft. Right or Left

    #30J: Threaded Tapaered Steel Spindle for HANDLER #30 or #30A polishing motor. Right Only.

    #16E-4: Tapered Steel Spindle for 5/8” Straight shaft on HANDLER’S #16E or #16T Lappers. Left Only.

    #20CAF: Combination Steel Spindle, Arbor & Flange for 1/2” or 5/8” straight shaft motor. Right or Left

    #30CAF: Threaded combination Steel Spindle, Arbor & Flange for use with HANDLER’s #30 or #30A polishing motor. Right Only.

    #20AF: Arbor & Flange, Steel for 1/2” or 5/8” straight shaft. Right or Left.

    #30AF: Threaded Arbor & Flange, Steel  for use with HANDLER’s #30 or #30A polishing motor. Right Only.

    #16E-5: Lapper Arbor & Flange, Steel for 5/8” straight shaft on HANDLER’s #16E or #16T Lappers. Left Only

    #20AC: Arbor & Flange, Steel for 1/2” or 5/8” straight shaft on HANDLER’s #16E or #16T Lappers. Right Only.

    #30AC: Threaded Arbor & Chuck, Steel for use with HANDLER’s #30 or #30A polishing motor. “Jacobs-Style”, 0” to 1/4”. Right Only.

    #8 Chuck: “Jacobs-Style”, from 0” to 1/4”. For use on 1/2” straight shaft. Right Only.

  • No more Data.

CALL US +1 800 274 2635 We will take it from there.
OR
SEND EMAIL TO US Just send your email to this address:info@handlermfg.com