Chucks &Amp; Spindles – Call For Pricing

Call (800) 274-2635 or email info@handlermfg.com for pricing and shipping details.

7 TAPERED STEEL CHUCK
The 7 tapered chuck is designed specifically for use with buffing wheels, brushes and lead centered wheels. Precision manufactured of alloy steel, this chuck is built for placement onto lathes and polishing motors containing standard dental tapered shafts. Specify 7L (Left) or 7R (Right) when ordering. Shipping Wgt.: 6 oz [107 g] Unit Dimensions: 5/8” Shank Diameter x 3 5/8” L [2cm x 9cm]

7B TAPERED BRASS CHUCK
The 7B tapered chuck is designed specifically for use with buffing wheels, brushes and lead centered wheels. The 7B Tapered chuck is made of brass to provide easier on/off placement onto tapered dental shafts, causing less shaft wear. Specify 7BL (Left) or 7BR (Right) when ordering. Shipping Wgt.: 6 oz [107 g] Unit Dimensions: 5/8” Shank Diameter x 3 5/8” L [2cm x 9 cm]

1-6 STONE CHUCKS
Stone Chucks are designed to accommodate abrasive wheels with various inside diameters as indicated below. Handler stone chucks are manufactured to exacting standards from quality brass. For use only on tapered lathe shafts. Specify chuck number (below) when ordering.

• #1 STONE – for 3/8” [9.5mm] I.D. (hole size) Wheel – RIGHT
• #2 STONE – for 3/8” [9.5mm] I.D. (hole size) Wheel – LEFT
• #3 STONE – for 5/16” [7.9mm] I.D. (hole size) Wheel -RIGHT
• #4 STONE – for 5/16” [7.9mm] I.D. (hole size) Wheel – LEFT
• #5 STONE – for 1/4” [6.3mm] I.D. (hole size) Wheel – RIGHT
• #6 STONE – for 1/4” [6.3mm] I.D. (hole size) Wheel – LEFT

Shipping Wgt.: 6 oz [107 g] Unit Dimensions: 5/8” Shank Diameter x 2” L [2cm x 9cm]

9 ARBOR BAND
Designed to accommodate 3/4” diameter x 3/4” wide [1.9cm x 1.9cm] abrasive bands. Manufactured of alloy steel and plated to fit onto standard dental tapered shafts, the abrasive band is held in place by tightening the end screw against the rubber arbor. Specify 9L (Left) or 9R (Right) when ordering. Shipping Wgt.: 8 oz [227 g] Unit Dimensions: 4 7/8” L x 5/8” Shank Diameter [12cm x 2cm] with a 1/4” Shank Diameter.

8T JACOBS TYPE JR. CHUCK
The 8T is designed specifically for use with small burs and mandrels which do not exceed 1/4” [6.3mm] in diameter. The 8T is built to be a less expensive and semi-precise adjustable chuck for use on lathes with tapered shafts. This chuck opens with a CCW twist and closes with a CW twist.
Specify 8T (right) or 8T-L(left) when ordering. Shipping Wgt.: 8 oz [227 g] Unit Dimensions: 2 1/4” L x 1” Shank Diameter [6cm x 3cm]

18 ATLAS PRECISION CHUCK
The 18 Atlas chuck is a precise “Jacobs type” chuck for use with chuck accessories having a diameter of .001” [0.03mm] to .250” [6.4mm].The 18 Atlas chuck attaches to the right shaft of a dental lathe with standard dental tapered shafts. Machined to precision limits, the 18 Atlas provides the technician with concentricity unmatched by any other adjustable chuck with no run-out and no vibration. For Right shaft only. Shipping Wgt.: 1 lb [0.5 Kg] Unit Dimensions: 2 1/2” L x 1 1/4” Shank Diameter [6cm x 3cm]

12 STONE CHUCK
Designed with a 1/4” [0.6cm] shank for use in Jacobs type chucks.This stone chuck accommodates abrasive stones with 1/4” [0.6cm] I.D. arbor only. Manufactured of alloy steel and plated. Specify 12L (Left) or 12R (Right) when ordering. Shipping Wgt.: 4 oz [113 g] Unit Dimensions: 2 3/16” long x 3/4” Shank Diameter [6cm x 2cm] with a 1/4”Shank Diameter.

13 ARBOR BAND CHUCK
Designed with 1/4” [0.6cm] shank for use in Jacobs type chucks. Accepts 3/4”x 3/4” [1.9cm x 1.9cm] abrasive arbor bands. Manufactured of alloy steel and plated. Specify 13L (Left) or 13R (Right) when ordering. Shipping Wgt.: 4 oz [113 g] Unit Dimensions: 2 5/8” L x 3/4” Shank Diameter [7cm x 2cm] with a 1/4” Shank Diameter.

13-1 TAPERED CHUCK
Designed with 1/4” [0.6cm] shank for use in Jacobs type chucks.This tapered chuck is built to accept small buffs, brushes and lead-centered wheels. Made of alloy steel and plated. Specify 13-1L (left) or 13-1R (right) when ordering. Shipping Wgt.: 4 oz [113 g] Unit Dimensions: 2 5/8” L x 1/2” Shank Diameter [7cm x 1.3cm] with a 1/4” Shank Diameter.

A tapered chuck manufactured of steel alloy for use on 1/2″ [1.3cm] straight or 5/8″ [0.6cm] straight shafts. Available for the Left or Right side of a polishing motor. This chuck provides the user with a heavy duty chuck for use with buffs, brushes and lead centered accessories. Mounts with screws. Please specify shaft diameter and Left or Right Position.

• 20L – 1/2″ [1.3cm]
• 20R – 1/2″ [1.3cm]
• 20L- 5/8″ [1.6cm]
• 20R – 5/8″ [1.6cm]