Chucks & Spindles

(Total votes: 0)

$0.00

Handler precision chucks are manufactured of alloy steel, brass or hardened steel. Handler chucks are made in various designs to provide manual, semi-automatic and automatic changing of burs, mandrels, abrasives, buffs and brushes. Chucks made by Handler are known the world over for functionality and reliability. All Chucks shown are for placement onto lathes with standard dental tapered shafts.

CHUCKS & SPINDLES

  • 7 TAPERED STEEL CHUCK
  • 7B TAPERED BRASS CHUCK
  • 1-6 STONE CHUCKS
  • 9 ARBOR BAND
  • 8T JACOBS TYPE JR. CHUCK
  • 18 ATLAS PRECISION CHUCK
  • 12 STONE CHUCK
  • 13 ARBOR BAND CHUCK
  • 13-1 TAPERED CHUCK

Share

  • 7 TAPERED STEEL CHUCK
    The 7 tapered chuck is designed specifically for use with buffing wheels, brushes and lead centered wheels. Precision manufactured of alloy steel, this chuck is built for placement onto lathes and polishing motors containing standard dental tapered shafts. Specify 7L (Left) or 7R (Right) when ordering. Shipping Wgt.: 6 oz [107 g] Unit Dimensions: 5/8” Shank Diameter x 3 5/8” L [2cm x 9cm]

    7B TAPERED BRASS CHUCK
    The 7B tapered chuck is designed specifically for use with buffing wheels, brushes and lead centered wheels. The 7B Tapered chuck is made of brass to provide easier on/off placement onto tapered dental shafts, causing less shaft wear. Specify 7BL (Left) or 7BR (Right) when ordering. Shipping Wgt.: 6 oz [107 g] Unit Dimensions: 5/8” Shank Diameter x 3 5/8” L [2cm x 9 cm]

    1-6 STONE CHUCKS
    Stone Chucks are designed to accommodate abrasive wheels with various inside diameters as indicated below. Handler stone chucks are manufactured to exacting standards from quality brass. For use only on tapered lathe shafts. Specify chuck number (below) when ordering.

    • #1 STONE - for 3/8” [9.5mm] I.D. (hole size) Wheel - RIGHT
    • #2 STONE - for 3/8” [9.5mm] I.D. (hole size) Wheel - LEFT
    • #3 STONE - for 5/16” [7.9mm] I.D. (hole size) Wheel -RIGHT
    • #4 STONE - for 5/16” [7.9mm] I.D. (hole size) Wheel - LEFT
    • #5 STONE - for 1/4” [6.3mm] I.D. (hole size) Wheel - RIGHT
    • #6 STONE - for 1/4” [6.3mm] I.D. (hole size) Wheel - LEFT

    Shipping Wgt.: 6 oz [107 g] Unit Dimensions: 5/8” Shank Diameter x 2” L [2cm x 9cm]

    9 ARBOR BAND
    Designed to accommodate 3/4” diameter x 3/4” wide [1.9cm x 1.9cm] abrasive bands. Manufactured of alloy steel and plated to fit onto standard dental tapered shafts, the abrasive band is held in place by tightening the end screw against the rubber arbor. Specify 9L (Left) or 9R (Right) when ordering. Shipping Wgt.: 8 oz [227 g] Unit Dimensions: 4 7/8” L x 5/8” Shank Diameter [12cm x 2cm] with a 1/4” Shank Diameter.

    8T JACOBS TYPE JR. CHUCK
    The 8T is designed specifically for use with small burs and mandrels which do not exceed 1/4” [6.3mm] in diameter. The 8T is built to be a less expensive and semi-precise adjustable chuck for use on lathes with tapered shafts. This chuck opens with a CCW twist and closes with a CW twist.
    Specify 8T (right) or 8T-L(left) when ordering. Shipping Wgt.: 8 oz [227 g] Unit Dimensions: 2 1/4” L x 1” Shank Diameter [6cm x 3cm]

    18 ATLAS PRECISION CHUCK
    The 18 Atlas chuck is a precise “Jacobs type” chuck for use with chuck accessories having a diameter of .001” [0.03mm] to .250” [6.4mm].The 18 Atlas chuck attaches to the right shaft of a dental lathe with standard dental tapered shafts. Machined to precision limits, the 18 Atlas provides the technician with concentricity unmatched by any other adjustable chuck with no run-out and no vibration. For Right shaft only. Shipping Wgt.: 1 lb [0.5 Kg] Unit Dimensions: 2 1/2” L x 1 1/4” Shank Diameter [6cm x 3cm]

    12 STONE CHUCK
    Designed with a 1/4” [0.6cm] shank for use in Jacobs type chucks.This stone chuck accommodates abrasive stones with 1/4” [0.6cm] I.D. arbor only. Manufactured of alloy steel and plated. Specify 12L (Left) or 12R (Right) when ordering. Shipping Wgt.: 4 oz [113 g] Unit Dimensions: 2 3/16” long x 3/4” Shank Diameter [6cm x 2cm] with a 1/4”Shank Diameter.

    13 ARBOR BAND CHUCK
    Designed with 1/4” [0.6cm] shank for use in Jacobs type chucks. Accepts 3/4”x 3/4” [1.9cm x 1.9cm] abrasive arbor bands. Manufactured of alloy steel and plated. Specify 13L (Left) or 13R (Right) when ordering. Shipping Wgt.: 4 oz [113 g] Unit Dimensions: 2 5/8” L x 3/4” Shank Diameter [7cm x 2cm] with a 1/4” Shank Diameter.

    13-1 TAPERED CHUCK
    Designed with 1/4” [0.6cm] shank for use in Jacobs type chucks.This tapered chuck is built to accept small buffs, brushes and lead-centered wheels. Made of alloy steel and plated. Specify 13-1L (left) or 13-1R (right) when ordering. Shipping Wgt.: 4 oz [113 g] Unit Dimensions: 2 5/8” L x 1/2” Shank Diameter [7cm x 1.3cm] with a 1/4” Shank Diameter.

    A tapered chuck manufactured of steel alloy for use on 1/2" [1.3cm] straight or 5/8" [0.6cm] straight shafts. Available for the Left or Right side of a polishing motor. This chuck provides the user with a heavy duty chuck for use with buffs, brushes and lead centered accessories. Mounts with screws. Please specify shaft diameter and Left or Right Position.

    • 20L - 1/2" [1.3cm]
    • 20R - 1/2" [1.3cm]
    • 20L- 5/8" [1.6cm]
    • 20R - 5/8" [1.6cm]
  • CHUCKS & SPINDLES
    • 7 TAPERED STEEL CHUCK
    • 7B TAPERED BRASS CHUCK
    • 1-6 STONE CHUCKS
    • 9 ARBOR BAND
    • 8T JACOBS TYPE JR. CHUCK
    • 18 ATLAS PRECISION CHUCK
    • 12 STONE CHUCK
    • 13 ARBOR BAND CHUCK
    • 13-1 TAPERED CHUCK
CALL US +1 800 274 2635 We will take it from there.
OR
SEND EMAIL TO US Just send your email to this address:info@handlermfg.com