32-3/4 High Torque Model Trimmer

(Total votes: 0)

$0.00

32-3/4 Model Trimmer
A Hi-Torque 12” diameter Model Trimmer powered by a 3/4 HP, capacitor start, 1725 rpm, ball bearing motor. Designed for and built for the very busy laboratory that trims a large quantity of models each day or the technician who wants maximum torque. A full wheel internal water spray washes the entire wheel as it rotates inside the aluminum housing, keeping the trimming wheel clean during operation. This rugged, Hi-torque trimmer is built to provide years of trouble free service.
Model Trimmer Options:
32-3/4 SV with Solenoid Valve
32-3/4-3214 with Ortho-Angulator
32-3/4-WKD with Diamond Wheel
115V/60Hz. Also available in 230V/50Hz, 230V/60Hz
and 115V/50Hz at additional cost.
Shipping weight: 62 lbs. ( 27.2 Kg)
Unit Dimensions: 16” D x 15” W x 14-1/2” H [41cm x 38cm x 37cm]

Ortho Angulator for Model Trimmers
An Orthodontic Angulator Attachment for precise grinding of angles onto plaster or stone models. Easily set to desired angle up to 120 degrees from mid-line in 5 degree increments. Produces precise angled models for sturdy presentation. For Handler 10” [25cm] or 12” [30cm] Model Trimmer. Orthodontic Angulator must be factory installed by Handler.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 5 1/4” x 5 1/4” [13cm x 13cm]

Instructions

Share

  • 32-3/4 Model Trimmer
    A Hi-Torque 12” diameter Model Trimmer powered by a 3/4 HP, capacitor start, 1725 rpm, ball bearing motor.
    Model Trimmer Options:
    32-3/4-SV with Solenoid Valve
    32-3/4-3214 with Ortho-Angulator
    32-3/4-WKD with Diamond Wheel
    115V/60Hz. Also available in 230V/50Hz, 230V/60Hz
    and 115V/50Hz at additional cost.
    Shipping weight: 62 lbs. [27.2 Kg]
    Unit Dimensions: 16” D x 15” W x 14-1/2” H [41cm x 38cm x 37cm]

    Ortho Angulator for Model Trimmers
    An Orthodontic Angulator Attachment for precise grinding of angles onto plaster or stone models. Easily set to desired angle up to 120 degrees from mid-line in 5 degree increments. Produces precise angled models for sturdy presentation. For Handler 10” [25cm] or 12” [30cm] Model Trimmer. Orthodontic Angulator must be factory installed by Handler.
    Shipping Wgt.: 1 lb [0.5 Kg]
    Unit Dimensions: 5 1/4” x 5 1/4” [13cm x 13cm]

  • Weight 62 lbs. [27.2 Kg]
    Dimensions 16” D x 15” W x 14-1/2” H [41cm x 38cm x 37cm]
    Composition:

    Cast Iron

    Options:

    Available in 32-3/4-3214 with Ortho-Angulator

    Instruction Manual

    Instructions

CALL US +1 800 274 2635 We will take it from there.
OR
SEND EMAIL TO US Just send your email to this address:info@handlermfg.com