26A Red Wing Lathe
$571.60
A full 1/4 HP, 1725/3450 RPM two-speed lathe for use on top of laboratory bench. Its 4 1/2” [11.4cm] shaft height allows for easy use by the technician with hands resting on the tabletop. Maintenance free standard dental, tapered shafts—each includes a right and left chuck remover for easy removal of standard dental chucks. Chucks and accessories ordered separately. The 26A is manufactured to provide years of durable service while being utilized for such operations as polishing and grinding. 115V/60Hz. Also available in 230V/50Hz with European plug type (model 26E) at additional cost.
Shipping Wgt.: 39 lbs [17.7 Kg]
Unit Dimensions: 15 1/2” L x 8” W x 7 3/4” H [39cm x 20cm x 20cm]
In stock
A full 1/4 HP, 1725/3450 RPM two-speed lathe for use on top of laboratory bench. Its 4 1/2” [11.4cm] shaft height allows for easy use by the technician with hands resting on the tabletop. Maintenance free standard dental, tapered shafts—each includes a right and left chuck remover for easy removal of standard dental chucks. Chucks and accessories ordered separately. The 26A is manufactured to provide years of durable service while being utilized for such operations as polishing and grinding. 115V/60Hz. Also available in 230V/50Hz with European plug type (model 26E) at additional cost. Shipping Wgt.: 39 lbs [17.7 Kg] Unit Dimensions: 15 1/2” L x 8” W x 7 3/4” H [39cm x 20cm x 20cm]
| Weight | 39 lbs [17.7 Kg] |
|---|---|
| Dimensions | 15 1/2” L x 8” W x 7 3/4” H [39cm x 20cm x 20cm] |
| Composition: | Cast Iron |
| Options: | Model 26E, 230V/50Hz |
| Instruction Manual | 26A Red Wing Lathe Manual |
P26-03A End Bell Right Side
P26-03L End Bell Left Side
P26-04 Spacing Washers (Set 3)
P26-05 Spring Washers (Set 3)
P26-06 Bolt Thru w/nuts (4 Set)
P26-06A Bolt Thru (4 Set)
P26-06B Nuts Only (4 Set)
P26-07 Bearings (2 Set)
P26-08A 2-SPD Rotor Tapered Shaft
P26-09 Centrifugal Switch-26,27,28
P26-11A Stator – Two Speed
P26-12A Switch Hood – Two Speed
P26-14 Cordset Grounding Type
P26-15B Rocker Switch – 2 Speed
P26-16 Switch Washer
P26-17 Base-Low: 4-1/2″ Shaft Height
P26-18 Bolts & Washers LO F/Low Base
P26-19 Base Plate
P26-22 Lubri-Plate-1-3/4 Oz Tube
P26-25 Red Plastic Caps R&L Side
P26-INSL Chuck Remover 1 Piece-Left
P26-INSR Chuck Remover 1 Piece-Right
