2010DCU Two Stage Digital Curing Unit

(Total votes: 0)

$0.00

2010DCU TWO-STAGE DIGITAL CURING UNIT
The 2010DCU Denture Curing Unit is a sophisticated curing unit featuring:

  • 2-Stage curing unit with a digital control panel on which sequences of polymerizing times and temperatures can be programmed as required by user.
  • The time of each step can be set between 0 and 999 minutes. The end temperatures at each plateau can be regulated by the user between 32oF and 210oF (0oC and 99oC).
  • To enable the user to see the actual program status at all times, the curing unit has a synoptic display.
  • Programming. It is extremely easy to program a heating sequence for the water in the tank.
  • Low maintenance and easy cleaning.

The 2010DCU Denture Curing Unit has a circuit breaker (fuse in power inlet) that protects the machine against electric overloads.
Unit Dimension: 13.8” H x 16.5” W x 14.9” D (350mm x 420mm x 380mm)
Tank Dimension: 11” H x 10” W x 10” D (280mm x 255mm x 255mm)
Weight: 45 lbs [17kg]
Power Supply: 115V, 50/60Hz, 13A
Consumption: 1500 W
Available in 230V/50/60Hz, 6 Amp – Model 2010DCU-E

Instructions

Share

  • The 2010DCU Denture Curing Unit has a circuit breaker (fuse in power inlet) that protects the machine against electric overloads.
    Unit Dimension: 13.8” H x 16.5” W x 14.9” D (350mm x 420mm x 380mm)
    Tank Dimension: 11” H x 10” W x 10” D (280mm x 255mm x 255mm)
    Weight: 45 lbs [17kg]
    Power Supply: 115V, 50/60Hz, 13A
    Consumption: 1500 W
    Available in 230V/50/60Hz, 6 Amp – Model 2010DCU-E

  • Weight 48 lbs [21.8 Kg]
    Dimensions 16” D x 13” W x 12 3/4” H [41cm x 33cm x 32cm]
    Composition:

    Cast Iron

    Options:

    1/3 HP (Model 31)
    1/4 HP (Model 31X)

    Instruction Manual

    Instructions

CALL US +1 800 274 2635 We will take it from there.
OR
SEND EMAIL TO US Just send your email to this address:info@handlermfg.com