16C Accela/Rotor

(Total votes: 1)

$0.00

The 16C Accela/Rotor is a combination of the Handler Accela/Rotor attachment 16D and No. 26A Red Wing Lathe.

The Accela/Rotor attachment converts the right side of the lathe from standard lathe speeds of 1725/3450 rpm to 12,000 and 24,000 rpm for use in finishing non-precious alloys and chrome-cobalt alloys. The 16C is shipped complete with a Red Wing Lathe, Accela/Rotor with movable light and protective shield, high speed spindle, adjusting levers and necessary guards. The high speed spindle incorporates an activating handle which opens and closes the 3/32” [2.4mm] collets for ease of changing burs and mandrels while the motor is running.
115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 50 lbs [22.7 Kg]
Unit Dimensions: 19” W x 9” H x 11” D [48.2cm x 22.9cm x 30cm]

16D ONLY
The 16D Accela/Rotor attachment turns your Red Wing Lathe into a High Speed alloy grinder. It attaches to the right side of your Red Wing lathe and provides 12,000 and 24,000 rpm speeds for proper metal finishing. Shipped complete with all necessary guards, instructions, light, and high speed spindle.
Shipping Wgt.:    11 lbs [5.0 Kg]
Unit Dimensions: 14” W x 12” D x 17” H [36cm x 31cm x 43cm]

Instructions

Share

  • 16C ACCELA/ROTOR
    The 16C Accela/Rotor is a combination of the Handler Accela/Rotor attachment 16D and No. 26A Red Wing Lathe.The Accela/Rotor attachment converts the right side of the lathe from standard lathe speeds of 1725/3450 rpm to 12,000 and 24,000 rpm for use in finishing non-precious alloys and chrome-cobalt alloys. The 16C is shipped complete with a Red Wing Lathe, Accela/Rotor with movable light and protective shield, high speed spindle, adjusting levers and necessary guards. The high speed spindle incorporates an activating handle which opens and closes the 3/32” [2.4mm] collets for ease of changing burs and mandrels while the motor is running.
    115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
    Shipping Wgt.: 50 lbs [22.7 Kg]
    Unit Dimensions: 19” W x 9” H x 11” D [48.2cm x 22.9cm x 30cm]

  • Weight 50 lbs [22.7 Kg]
    Dimensions 19” W x 9” H x 11” D [48.2cm x 22.9cm x 30cm]
    Composition:

    Cast Iron

    Options:

    Available in 1/3 HP See Model 28L

    Instruction Manual

    Instructions

CALL US +1 800 274 2635 We will take it from there.
OR
SEND EMAIL TO US Just send your email to this address:info@handlermfg.com