16C ACCELA/ROTOR

(Total votes: 0)

$0.00

16C ACCELA/ROTOR 

The 16C Accela/Rotor is a combination of the Handler Accela/Rotor attachment 16D and No. 26A Red Wing Lathe.The Accela/Rotor attachment converts the right side of the lathe from standard lathe speeds of 1725/3450 rpm to 12,000 and 24,000 rpm for use in finishing non-precious alloys and chrome-cobalt alloys. The 16C is shipped complete with a Red Wing Lathe, Accela/Rotor with movable light and protective shield, high speed spindle, adjusting levers and necessary guards. The high speed spindle incorporates an activating handle which opens and closes the 3/32” [2.4mm] collets for ease of changing burs and mandrels while the motor is running. 

115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost. 
Shipping Wgt.: 50 lbs [22.7 Kg] 
Unit Dimensions: 19” W x 9” H x 11” D [48.2cm x 22.9cm x 30cm] 

Available in Model 16C-1, Accela/Rotor attachment installed on Model 26 High Base Lathe.

Share

  • 16C ACCELA/ROTOR

    The 16C Accela/Rotor is a combination of the Handler Accela/Rotor attachment 16D and No. 26A Red Wing Lathe.The Accela/Rotor attachment converts the right side of the lathe from standard lathe speeds of 1725/3450 rpm to 12,000 and 24,000 rpm for use in finishing non-precious alloys and chrome-cobalt alloys. The 16C is shipped complete with a Red Wing Lathe, Accela/Rotor with movable light and protective shield, high speed spindle, adjusting levers and necessary guards. The high speed spindle incorporates an activating handle which opens and closes the 3/32” [2.4mm] collets for ease of changing burs and mandrels while the motor is running.

    115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
    Shipping Wgt.: 50 lbs [22.7 Kg]
    Unit Dimensions: 19” W x 9” H x 11” D [48.2cm x 22.9cm x 30cm]

    Available in Model 16C-1, Accela/Rotor attachment installed on Model 26 High Base Lathe.

  • 115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost. 
    Shipping Wgt.: 50 lbs [22.7 Kg] 
    Unit Dimensions: 19” W x 9” H x 11” D [48.2cm x 22.9cm x 30cm] 

    Available in Model 16C-1, Accela/Rotor attachment installed on Model 26 High Base Lathe.

CALL US +1 800 274 2635 We will take it from there.
OR
SEND EMAIL TO US Just send your email to this address:info@handlermfg.com