101 Dust Collector
$3,179.76
101 DUST COLLECTOR
1 HP, 800CFM, collect particles as small as 1⁄2 microns
The unit is finished in a baked, durable coating, runs on 115V/60HZ and ships complete with switch and box type silencer.
Shipping weight: 270 lbs. [108.9 kg]
Unit dimensions: 26” W x 24” D x 41” H [66cm x 61cm x 104cm]
Available with 24 cloth filter bags.
Available in the following alternative configurations:
220V/60HZ, single phase – Order model 101-2201
220V/60HZ three phase – Order model 101-2203
In stock
Central Dust Collection Units for Multiple Work Stations
Built-in Silencer on Dust Collectors
101 DUST COLLECTOR
A 1 HP suction unit designed to provide suction for up to 4 work positions, simultaneously. Powered by a 1 HP ball bearing, capacitor start, industrially rated brushless motor, the model 101 provides cost effective dust extraction with a state of the art drum cartridge filter technology which collect particles as small as 1⁄2 microns.
The 101 dust collector generates 800CFM (cubic feet per minute) through the inlets provided. The unit is finished in a baked, durable coating, runs on 115V/60HZ and ships complete with switch and box type silencer.
Shipping weight: 270 lbs. [108.9 kg]
Unit dimensions: 26” W x 24” D x 41” H [66cm x 61cm x 104cm]
Available with 24 cloth filter bags.
Available in the following alternative configurations:
220V/60HZ, single phase – Order model 101-2201
220V/60HZ three phase – Order model 101-2203
Weight | 270 lbs. [108.9 kg] |
---|---|
Dimensions | 26” W x 24” D x 41” H [66cm x 61cm x 104cm] |
Composition: | Steel |
Options: | Available with 24 cloth filter bags. Available in the following alternative configurations: 220V/60HZ, single phase – Order model 101-2201 220V/60HZ three phase – Order model 101-2203 |
Instruction Manual | Instructions |
P101-02 Door Upper
P101-03 Door Lower
P101-04 Handle for 101 Door (One)
P101-05 Tray Lower Cabinet for 101
P101-06 Shaker Assembly w/Handle
P101-08 25.00/Bag Hold-Down Bars, Each
P101-09 Thumb Screw for Hold-Down B
P101-10A Motor Suction 115/220 1Ph
P101-10B Motor Suction 208-220/440 3
P101-11 Motor-Mounting Bolts, Each
P101-12 Motor-Mounts-Rubber (Set of 4)
P101-14 Wheel Suction 101
P101-14A Allen Wrench/101 Suc Whl1/8
P101-15 Suction Housing
P101-16 Box Type Silencer
P101-17 Sheet Metal Metal Screws
P101-18 Felt Stripping, Per Foot
P101-19 Switch On/Off w/Heater Coil
P101-19H Heater Coil/Switch-Spec Volt
P101-31 Red Cap for Dust Collectors
P101-32 Bearings (Set) for 101 D/C